LS Engine & Transmission Packages

BluePrint Engines LS Builder Series drivetrains are manufactured and shipped as a complete package with the engine, transmission and front-drive accessories already mated together. BluePrint Engines matches one of its brand-new crate engines with the customer’s choice of an automatic or manual transmission, bolts on the front accessories and dresses them with show-worthy parts. Designed to make drivetrain installation less painful and save valuable build time and expense.

All BluePrint Engines engines come with an industry-leading 30 months / 50,000 miles warranty.

BluePrint Engines
308-236-1010
www.blueprintengines.com

The System

Solving the age-old problem of where to put speakers in classics, customs and street rods, “The System” allows you to keep the integrity of your vehicle intact yet enjoy quality sound like many of us have in our new cars. Satellite speakers look like A/C vents and can be mounted under the dash, on the kick panels or even the back package tray. The woofer is optimally mounted under the seat but can be mounted in the trunk if space requires it.

The System contains a flat active aluminum subwoofer enclosure with 8-inch woofer plus 2-channel amplifier, two 3-inch mid-tweeter satellite speakers in die cast metal housings, and RCA or speaker level input (2 channel). Built in adjustments include separate gain control for 2 channel amp and subwoofer, high pass filter for satellites, subsonic filter bass boost and low pass filter for the subwoofer. It has auto power on if using speaker level inputs. Amplifier installation kit is included.

Custom Autosound Mfg.
800-888-8637 
www.customautosoundmfg.com

Weld Bungs

Steel weld in bungs for your project are now available from All American Billet. These bungs are 100% made in the USA and are available in three different sizes.

1.223-inch outer diameter x 0.1-inch x 5/8-18 thread
0.992-inch outer diameter x 0.842-inch x 5/8-18 thread
1.25-inch outer diameter x 1-inch x 3/4-16 thread

All American Billet
623-580-7214
www.allamericanbillet.com

’67-’87 Grille Trim

Holley Classic Trucks has the perfect factory trim to finish off your project the right way. These aluminum grille moldings for 1967-1987 GM Trucks are brightly polished then clear anodized for corrosion protection, resulting in long-lasting good looks.

Holley has created this Grille Surround kit to take the guesswork out of determining what parts work together. Order a single part number and get all the parts needed!

Holley Classic Trucks
866-464-6553
www.holley.com

features:

• Mimics OE trim for a factory appearance
• Clear anodized aluminum for long-lasting good looks
• Includes all factory mounting points for an easy installation
• Contains mounting hardware for a trouble-free job

Hooker Blackheart

Hooker BlackHeart introduces its Cat-Back dual exit exhaust system for the 2014-2018 Chevrolet/GMC Silverado and Sierra 1500 trucks with the 6.2L engine. This system is designed with a 3.5-inch inlet pipe and dual mandrel bent 2.5-inch 409 stainless steel tailpipes that offer excellent corrosion resistance and maximum exhaust flow for improved performance. The system uses a polished high-flow muffler design that not only looks good, but also provides a deep performance tone that will make your truck stand out from the crowd. Dual 4-inch polished 304 stainless steel tips are used and have an angle-cut end and the Hooker logo laser etched into them to add additional style to the system. All hardware is included, and this system utilizes the factory mounting points for an OE type of fit and a simple installation.

Hooker
866-464-6553
www.holley.com

Master Heat

When brake fluid becomes too hot and starts to boil, brake performance may be compromised significantly, resulting in a soft pedal and potentially a complete loss of function. Shielding the master cylinder from the underhood heat can prevent these issues.

Lava Master Cylinder Heat Shield uses a specially formulated thermal-barrier material made from volcanic rock–based fibers. They fit both driver- and passenger-side brake-line connections. The hook-and-loop fastening system makes it easy to install, remove and secure in place.

Heatshield Products
844-723-2665
www.heatshieldproducts.com

Trigger Kits

The MSD Ford Coyote Crank trigger is available with a Hall-Effect sensor, making it the most accurate way to trigger your EFI. Now available with an adjustable pointer with a 12-degree range of movement for finding that precise timing, the kit installs easily and uses rigid aluminum mounting bracketry and stainless hardware that will not flex or cause timing fluctuations. Powerful magnets are embedded in a 3/8-inch thick 6061-T6 aluminum trigger wheel that will send your EFI a clean signal for every firing.

MSD
866-464-6553
www.holley.com

features:

• Easy to install as traditional MSD Crank trigger Kits (use with ATI Balancer)
• Most accurate way to trigger your electronic fuel injection (EFI)
• 12-degree range of adjustment on timing pointer allows precise indexing relative to #1 cylinder Top Dead Center
• 3-wire Hall-effect sensor that is less susceptible to noise interference
• Powerful magnets are embedded in a 3/8-inch thick billet 6061-T6 aluminum trigger wheel
• Rigid mounting that will not flex and cause timing fluctuation

All BluePrint Engines LS Builder Series packages come shipped with the following:

• Complete assembly of LS engine, transmission, front accessories
• Choice of manual or automatic transmission
• Torque converter or clutch assembly installed
• ECU, harness, and drive by wire pedal kit
• Starter motor installed
• One-wire alternator installed
• Swap-ready oil pan installed
• Choice of polished or black accessory drive
• Available with or without air-conditioning and power steering
• Correct pressure power steering pump
• Common Sanden air-conditioning compressor